Click a thumbnail to swap the main view · photographs show the product family
Guardrails & railings
Planter Railing
A low railing in coated steel or PVC around planters, lawns and green belts — run, height and colour made to the project specification, with curved runs and stepped kerbs set out on the drawing.
- Product category
- Guardrails & railings — low coated-steel or PVC railing for planters, lawns and green belts
- Brand
- HONGYING GUARDRAIL
- Manufacturer
- Hubei Hongying Guardrail Co., Ltd. — Jiangxia District, Wuhan, Hubei, China
- Project service
- Made to the project specification: drawing, standard, quantity and destination port
How to select
Settle the material first — coated steel where the railing takes knocks along a road, PVC where the planting scheme leads — then the run in metres with its curves and stepped kerbs, the height, the colour reference and the post fixing. Whether the run follows the kerb or stands behind the planting changes the fixing, so it helps to say which of the two is being built. Those answers settle the sections, the post spacing and the colour on the shop drawing.
The job of a planter railing is to make the planting inconvenient to cross rather than to keep anyone out. It keeps pedestrians from cutting the corner, stops a car or a scooter from parking on the bed and gives the kerb a defined edge — and because it is deliberately lower than a boundary railing, it reads as part of the street furniture rather than as a barrier. It is made in coated steel or PVC, and the run, height, colour, post spacing and fixing are made to the project specification.
Photographs below show the product family; the specification on this page is the manufacturer's published figure and is quoted unchanged.
01 · Product overview
What the planter railing is made of and where it is used
It is made in coated steel or PVC, with the run, height, colour and post spacing made to the project specification, and the published scope is planters, lawns, planted beds, roadside green belts and community planting.
The job of a planter railing is to make the planting inconvenient to cross rather than to keep anyone out. It keeps pedestrians from cutting the corner, stops a car or a scooter from parking on the bed, and gives the kerb a defined edge — and because it is deliberately lower than a boundary railing, it reads as part of the street furniture rather than as a barrier.
It is made in coated steel or PVC. Coated steel is the usual choice along a road, where the railing takes knocks and has to hold its shape over a long run. PVC is chosen where the planting scheme leads and the railing should look like part of the landscape and keep its colour without repainting. Both are quoted from the drawing.
No run, height or section figures are published for this railing, so the layout does the work. Curved beds, stepped kerbs and changes of level are all set out on the drawing rather than improvised on site, and the post spacing and fixing follow the layout. A run that follows the back of a bed and a run that follows the kerb are fixed differently, so it helps to say which one is being built.
Send the plan of the beds with the run in metres including curves and corners, the height you want, the position of the railing, the colour reference and the destination port, and the sections, post spacing and colour are confirmed on the shop drawing. A planter railing is not a vehicle barrier, a crowd line or a security fence; where the requirement is one of those, the road guardrail, the crowd-control barrier or the zinc-steel perimeter railing is quoted instead.
- MaterialCoated steel or PVC — to specification
- RunMade to the project specification
- HeightMade to the project specification
- ColourMade to the project specification
- LayoutCurves, stepped kerbs and level changes on the drawing
- Post spacing and fixingMade to the project specification
- Typical usePlanters, lawns, planted beds, roadside green belts
- Not intended forVehicle impact, crowd control or boundary security
Pictured: the railing running around a planted area beside a road, a low run set along a lawn edge in a green belt, and the rail-and-vertical-bar section detail.
02 · Technical specification
Planter Railing — specification
The figures below are the specification published for this product and are quoted unchanged: they are the numbers a quotation and a shop drawing are built on. Where a row says made to the project specification, send the drawing or the standard you follow and it is confirmed in writing.
| Product / model reference | Planter railing (花坛护栏) — low railing for planters, lawns and green belts. |
|---|---|
| Material | Coated steel or PVC — made to the project specification. |
| Run | Made to the project specification — send us the drawing or the standard you follow. |
| Height | Made to the project specification — send us the drawing or the standard you follow. |
| Colour | Made to the project specification — send the colour reference or a sample and it is confirmed on the shop drawing. |
| Layout | Curved runs, stepped kerbs and changes of level are set out on the drawing. |
| Post spacing and fixing | Made to the project specification — confirmed on the shop drawing. |
| Typical use | Planters, lawns, planted beds, roadside green belts and community planting. |
| Not intended for | Vehicle impact, crowd control or boundary security — for those, the road guardrail, the crowd-control barrier and the zinc-steel perimeter railing are quoted instead. |
| Packing, price and delivery | |
| Packing | Rails, posts and fittings are bundled and palletised for container loading; the exact packing method is confirmed per specification with the loading plan. |
| Price | Price: quoted per order — FOB Wuhan / Shanghai, CIF or DDP |
| MOQ | Confirmed per specification — send the drawing, quantity and destination port and we reply with MOQ, loading plan and lead time within one business day. |
| Loading | Confirmed per specification — send the drawing, quantity and destination port and we reply with MOQ, loading plan and lead time within one business day. |
| Lead time | Confirmed per specification — send the drawing, quantity and destination port and we reply with MOQ, loading plan and lead time within one business day. |
| Documentation | Proforma invoice, commercial invoice, packing list and certificate of origin as required. Buyers who need CE / EN / ASTM documentation: tell us the standard and we will confirm in writing what we can supply. |
On a narrow screen the table scrolls sideways; every row stays readable in full.
03 · Features
Why this planter railing is specified
- Use: planters, lawns, planted beds, roadside green belts and community planting.
- Material: coated steel or PVC — made to the project specification.
- Run, height and colour: made to the project specification — send us the drawing or the standard you follow.
- Layout: curved runs, stepped kerbs and changes of level are set out on the drawing.
- Post spacing and post fixing: made to the project specification and confirmed on the shop drawing.
- Keeps pedestrians off the planting and parked vehicles off the bed, and gives the kerb a defined edge.
- Not intended for: vehicle impact, crowd control or boundary security — other products in the family are quoted for those.
- Buyers who need CE / EN / ASTM documentation: tell us the standard and we will confirm in writing what we can supply.
04 · Made to your drawing
Made to the project specification
Send us the drawing or the standard you follow and we confirm in writing what we can supply against it. For a planter railing, that means the plan of the beds with the run in metres, the height, whether the railing follows the kerb or stands behind the planting, the material, the colour reference and the post fixing.
What settles this specification
The layout and the run, the height and where the railing stands, the material, the colour and the post fixing. Curved beds, stepped kerbs and changes of level are all set out on the drawing.
05 · Packing, price and delivery
How planter railing is packed, priced and delivered
Price: quoted per order — FOB Wuhan / Shanghai, CIF or DDP. MOQ, loading plan and lead time are confirmed per specification — send the drawing, quantity and destination port and we reply within one business day.
| Packing | Rails, posts and fittings are bundled and palletised for container loading; the exact packing method is confirmed per specification with the loading plan. |
|---|---|
| Price | Price: quoted per order — FOB Wuhan / Shanghai, CIF or DDP |
| MOQ | Confirmed per specification — send the drawing, quantity and destination port and we reply with MOQ, loading plan and lead time within one business day. |
| Loading | Confirmed per specification — send the drawing, quantity and destination port and we reply with MOQ, loading plan and lead time within one business day. |
| Lead time | Confirmed per specification — send the drawing, quantity and destination port and we reply with MOQ, loading plan and lead time within one business day. |
| Documentation | Proforma invoice, commercial invoice, packing list and certificate of origin as required. Buyers who need CE / EN / ASTM documentation: tell us the standard and we will confirm in writing what we can supply. |
| Colour | RAL to sample — send the reference or a physical sample and we confirm the coating or the print on the shop drawing. |
Long sections are bundled by type, so one bundle is one kind of part when the container is unpacked on site.
06 · Questions buyers ask
Planter Railing — frequent questions
Every answer below repeats a figure or a term already published on this page; nothing is added to the specification here.
How is the planter railing fixed down?
Post spacing and fixing are made to the project specification and confirmed on the shop drawing. A run that follows the back of a bed and a run that follows the kerb are fixed differently, so it helps to say which one is being built; the position of the railing is one of the points set out on the drawing.
What is made to my drawing?
Material, run, height and colour are made to the project specification, and the layout — curved runs, stepped kerbs and changes of level — is set out on the drawing, with post spacing and fixing confirmed on the shop drawing. Send the plan of the beds with the run in metres including curves and corners, the height, the position, the colour reference and the destination port.
Is there a catalogue model number or a published price?
The published product / model reference is planter railing — a low railing for planters, lawns and green belts; no run, height or section figures are published, because the layout does the work. Price is quoted per order — FOB Wuhan / Shanghai, CIF or DDP — and MOQ, loading plan and lead time are confirmed per specification; send the drawing, quantity and destination port and we reply within one business day.
Is the planter railing a vehicle barrier or a security fence?
No. The published use is planters, lawns, planted beds, roadside green belts and community planting, and the railing is not intended for vehicle impact, crowd control or boundary security. Where the requirement is one of those, the road guardrail, the crowd-control barrier and the zinc-steel perimeter railing are quoted instead.
How is the order packed and what documents come with it?
Rails, posts and fittings are bundled and palletised for container loading; the exact packing method is confirmed per specification with the loading plan. Documentation is proforma invoice, commercial invoice, packing list and certificate of origin as required. Buyers who need CE / EN / ASTM documentation tell us the standard, and it is confirmed in writing what can be supplied.
Related products
Usually quoted with planter railing
PVC Railing
Extruded PVC profile rails and vertical bars between posts — rails 36 × 56 mm, bars 20 × 46 mm and posts in 58 × 78, 88 × 88 or 121 × 121 mm, made from domestic virgin material.
View product
Zinc-Steel Perimeter Railing
A boundary railing in hot-dip galvanised steel tube — the usual section 1.8 m × 3 m, 2–4 rail levels, posts and rails in 50 × 50 / 40 × 40 mm and vertical bars in 19 × 19 mm, bolted together on site.
View product
Crowd-Control Barrier
Interlocking steel sections on removable feet for queuing, events and pedestrian separation — the sections stack flat for transport and the run can be re-laid in a different shape.
View product
Contact
Send the drawing, the quantity and the destination port
Tell us the specification, the finish, the quantity and where the order is going. Price: quoted per order — FOB Wuhan / Shanghai, CIF or DDP. We reply within one business day.
Office: Room 906, Niuniu Creative Building, Shucheng Road, Hongshan District, Wuhan, China
Factory: Jiangxia District, Wuhan, Hubei, China